 
Rudi
Registered: May 2010 Posts: 100 
Fast way to rotate a char?
Im not talking about rol or ror, but swap bits so that they are rotated 90 degrees:
Example:
a char (and the bits can be random):
10110010 byte 1..
11010110 byte 2.. etc..
00111001
01010110
11011010
10110101
00110011
10110100 after "rotation" (rows and columns are swapped):
11001101
01011000
10100111
11111111
00101000
01010101
11011010
00100110 is it possible to use lookup tables for this or would that lookup table be too big?
or other lookuptable for getting and setting bits?
Rudi 

... 99 posts hidden. Click here to view all posts.... 
 
Copyfault
Registered: Dec 2001 Posts: 222 
@Rudi: what do you mean with "merge 4x4 and 2x2"? I understand the 312cycles version, though this is only valid if you stick to zp load/store. If you access absolute adresses (which will be necessary to read/write to charset data or bitmap resp.), this very same version ends up with 328 cycles > identical to Axis' first routine.
By reordering the merges just like Axis pointed out this can be lowered to 328  12 = 316 (300 if you stick to zp load/store).
So how do you come down to 299 cycles??? 
 
Rudi
Registered: May 2010 Posts: 100 
What I really meant was reordering merges, which I think Axis pointed on in one of his posts. Here I only managed to reorder the 2x2 rotation into 4x4 by removing some sta's and reusing the accumulator iirc. But unfortunately the code is so messy that I myself easily get tired after trying to optimize this. So, here comes a long list of code if you dont mind. I used tables for the shifts, and dot mind the eortag its the same as or. the next tag is the and value. Also used specific addresses in zp since this is just a test.
;
;4x4 & 2x2 rotation (195 cycles)
;
ldy $61
lax $65
and #$0f
eor shl4, y
sta $81
tya
and #$f0
eor shr4, x
sta $85
ldy $63
lda $67
and #$0f
eor shl4, y
ldy $81
tax
and #$33
eor shl2_eor_cc, y
sta $91
tya
and #$cc
eor shr2_eor_33, x
sta $93
lda $63
ldx $67
and #$f0
eor shr4, x
ldy $85
tax
and #$33
eor shl2_eor_cc, y
sta $95
tya
and #$cc
eor shr2_eor_33, x
sta $97
ldy $60
lax $64
and #$0f
eor shl4, y
sta $80
tya
and #$f0
eor shr4, x
sta $84
ldy $62
lax $66
and #$0f
eor shl4, y
ldy $80
and #$33
eor shl2_eor_cc, y
sta $90
tya
and #$cc
eor shr2_eor_33, x
sta $92
lda #$62
and #$f0
eor shr4, x
ldy $84
tax
and #$33
eor shl2_eor_cc, y
sta $94
tya
and #$cc
eor shr2_eor_33, x
sta $96
;
;1x1 rotation (104 cycles)
;
ldy $90
lax $91
and #$55
eor shl1_eor_aa, y
sta $70
tya
and #$aa
eor shr1_eor_55, x
sta $71
ldy $92
lax $93
and #$55
eor shl1_eor_aa, y
sta $72
tya
and #$aa
eor shr1_eor_55, x
sta $73
ldy $94
lax $95
and #$55
eor shl1_eor_aa, y
sta $74
tya
and #$aa
eor shr1_eor_55, x
sta $75
ldy $96
lax $97
and #$55
eor shl1_eor_aa, y
sta $76
tya
and #$aa
eor shr1_eor_55, x
sta $77 I wanted to make the 4x4vs2x2 rotator shorter by using other method, but havent found a solution for this yet (the 1x1 rotator also, for that matter, by optimizing those two distinct sections).
The character is at $60$67 and the result is at $70$77. 
 
Copyfault
Registered: Dec 2001 Posts: 222 
I have to admit that the approach with those "Amigastyle"merges is really outstanding. Hardly possible to force oneself to think different approaches...
Ok, at least I tried ;) One idea I had is to use the CMPinstruction to read out the bits of every byte. E.g.
ldx #$7f
cpx byte0
rol
cpx byte1
rol
cpx byte2
rol
cpx byte3
rol
cpx byte4
rol
cpx byte5
rol
cpx byte6
rol
cpx byte7
rol
eor #$ff
sta dest0
but this already sums up to 47cycle (if sticking to zp lda/sta/cpx). Furthermore, this will only work for dest0 unless one masks out bit7bit1 step by step > every byte needed 8 times, too many table lookups > most probably not feasible :/
Another idea would be to store the char bit patterns along the diagonal. Usually we have
byte0: b7 b6 b5 b4 b3 b2 b1 b0
byte1: b7 b6 b5 b4 b3 b2 b1 b0
byte2: b7 b6 b5 b4 b3 b2 b1 b0
byte3: b7 b6 b5 b4 b3 b2 b1 b0
byte4: b7 b6 b5 b4 b3 b2 b1 b0
byte5: b7 b6 b5 b4 b3 b2 b1 b0
byte6: b7 b6 b5 b4 b3 b2 b1 b0
byte7: b7 b6 b5 b4 b3 b2 b1 b0
Now we could store the same information as e.g.
data0: byte0.b0 X X X X X X X
data1: byte0.b1 byte1.b0 X X X X X X
...
data7: byte0.b7 byte1.b6 byte2.b5 byte3.b4 byte4.b3 byte5.b2 byte6.b1 byte7.b0
...
dataE: byte7.b7 X X X X X X X
The huge advantage of such a data structure is obvious: mirroring the bitpatterns is equivalent to reversing the order of the dataXbytes. Drawback: in order to display the corresponding bitpattern a conversion routine is _always_ needed (no matter if the "original" bitpattern should be displayed or the "mirrored" pattern). I couldn't come up with a decent routine to compensate for this.
Maybe someone can take the good points out of these thoughts... 
 
Color Bar
Registered: Oct 2012 Posts: 138 
I'm now at 326 cycli. 
 
Rudi
Registered: May 2010 Posts: 100 
Looking at the 4x4 rotation an recipe that I have made look like this:1. rol 4 times higher 4 bytes.
2. swap lower nybbles of byte0>byte4, byte1>byte5 etc.
3. rol 4 times lower 4 bytes. Done.
1 and 3 can be done with lookuptables. 2 is a more tricky.
So, what no.2 need is a fast way to swap lonybbles of two bytes, but it seems to be difficult. One would have to do that in 14 cycles or so. Impossible.
Someone gave me this xorswap algorithm which takes 27 cycles:LDA byte1
AND #$0f
EOR byte2
STA byte2
AND #$0f
EOR byte1
STA byte1
AND #$0f
EOR byte2
STA byte2 I also made this, but it takes one cycle more than the former:LDX byte1
LDY byte2
LDA lowCleared,x
ORA andTab,y
STA byte1
LDA lowCleared,y
ORA andTab,x
STA byte2 I guess this wont help at all. Because 27*4 = 108 cycles. Allready reached the limit from the 312 version where each rotatorsection take 104 cycles. 
 
Color Bar
Registered: Oct 2012 Posts: 138 
Quoting RudiSomeone gave me this xorswap algorithm which takes 27 cycles:LDA byte1
AND #$0f
EOR byte2
STA byte2
AND #$0f
EOR byte1
STA byte1
AND #$0f
EOR byte2
STA byte2
26 cycles:
lax byte1
and #$f0
ldy byte2
ora grabLowNybble,y ;This table performs AND #$0f
sta byte1 ;Now low nybble of byte2 is in byte1
tya
and #$f0
ora grabLowNybble,x ;byte1 was kept in X
sta byte2

 
Oswald
Registered: Apr 2002 Posts: 4176 
you just need a 64k table
lda byte1byte2
sta result
:) 
 
Rudi
Registered: May 2010 Posts: 100 
Colorbar: nice
Oswald: hah yeah, like thats gonna happen. :P 
 
Color Bar
Registered: Oct 2012 Posts: 138 
Flip disk ...
Rotate monitor clockwise ... 
 
Oswald
Registered: Apr 2002 Posts: 4176 
del. 
Previous  1  2  3  4  5  6  7  8  9  10  11  Next 