Log inRegister an accountBrowse CSDbHelp & documentationFacts & StatisticsThe forumsAvailable RSS-feeds on CSDbSupport CSDb Commodore 64 Scene Database
 Welcome to our latest new user kemist ! (Registered 2018-10-19) You are not logged in 
CSDb User Forums


Forums > C64 Coding > Loading and saving to disk using kernel
2018-06-13 18:59
JackAsser

Registered: Jun 2002
Posts: 1458
Loading and saving to disk using kernel

Assume: Machine booted from cart. Cart ROM at $8000-$bfff. IO at $Dxxx and KERNAL at $e000-$ffff

What calls do I have to do to use KERNEL load/save?
What RAM and ZP will be trashed by this?
How will it affect my IRQs? (I have CIA1 and raster IRQs running via $0314/15)
 
... 10 posts hidden. Click here to view all posts....
 
2018-06-14 01:37
JackAsser

Registered: Jun 2002
Posts: 1458
I know how to load and save and that they toggles interrupts etc. That is not what I’m asking for though.
2018-06-14 07:47
tlr

Registered: Sep 2003
Posts: 1188
Check the reset code here:
https://sourceforge.net/p/vice-emu/code/HEAD/tree/testprogs/C64..

Maybe you can go even more minimal if only load/save is needed.
The kernal touches nothing below $90 if I recall correctly. The screen editor uses quite a lot so skipping $ff5b will probably save you a bunch.
2018-06-14 10:07
enthusi

Registered: May 2004
Posts: 651
You can use vice(monitor) to trace touched areas.
memmapzap (mmzap) to reset stats
memmapshow (mmsh)
Syntax: memmapshow [<mask>] [<address_opt_range>]
(the mask is a single byte with bit flags).
This is quite helpful and would be a good start, I think.
I usually just buffer the whole ZP somewhere before using kernal routines from within a game or such.
2018-06-14 11:08
JackAsser

Registered: Jun 2002
Posts: 1458
Awesome guys, thanks!
2018-06-14 12:40
Flavioweb

Registered: Nov 2011
Posts: 362
In my experience, if we use these kernal subroutines to set/load/save:
$FFE7, $FFBD, $FFBA, $FFC0, $FFC6, $FFCF, $FFC3, $FFCC, $FFC9, $FFD2

kernal uses these zero page locations:
$90, $91, $93, $94, $95, $98, $99, $9A, $9B, $9D, $A3, $A4, $AC, $AD, $AE, $AF, $B7, $B8, $B9, $BA, $BB, $BC, $C1, $C2.

We start from the assumption that system was already setup (using some code like TLR stated above).
Irq flag is set by kernal during all the IEC transfer time, then cleared.
This mean your own IRQ code should be delayed or you may have some unwanted side effects, according to what your code does.
If vectors ram still untouched, you can simply do nothing with locations $031A-$0333 (apart init them at start). Otherwise you need to backup/restore or kernal save/load may crash at some point...
These are my 2 cents =)
2018-06-14 15:12
Oswald

Registered: Apr 2002
Posts: 4291
duh! its KERNAL, not kernel.
2018-06-14 15:15
Oswald

Registered: Apr 2002
Posts: 4291
raster irqs survive kernAl load, but they'll experience lots of SEI periods as big as half or more than a frame rarely.

just start a kernAl friendly music player raster irq which returns to basic, then you can load, and observe how the jsr call is delayed (inc/dec d020 is handy)
2018-06-14 18:55
JackAsser

Registered: Jun 2002
Posts: 1458
Quote: In my experience, if we use these kernal subroutines to set/load/save:
$FFE7, $FFBD, $FFBA, $FFC0, $FFC6, $FFCF, $FFC3, $FFCC, $FFC9, $FFD2

kernal uses these zero page locations:
$90, $91, $93, $94, $95, $98, $99, $9A, $9B, $9D, $A3, $A4, $AC, $AD, $AE, $AF, $B7, $B8, $B9, $BA, $BB, $BC, $C1, $C2.

We start from the assumption that system was already setup (using some code like TLR stated above).
Irq flag is set by kernal during all the IEC transfer time, then cleared.
This mean your own IRQ code should be delayed or you may have some unwanted side effects, according to what your code does.
If vectors ram still untouched, you can simply do nothing with locations $031A-$0333 (apart init them at start). Otherwise you need to backup/restore or kernal save/load may crash at some point...
These are my 2 cents =)


Big thanks. I’ll make ld65 keep those areas clean and try it! :)
2018-06-14 20:44
Danzig

Registered: Jun 2002
Posts: 375
@JackAsser: Don't know if its of any value for you but if you use $ee13 you can jump to $ee20 instead and use

LDA #$00
STA $A5
JSR $EE85
JSR $EEA9
BPL *-3
SEI
jsr $ee20

with moving the SEI below the BPL the routine just rips ~30 rasterlines while loading. One might call it "pretty cheap irq loader" :-D

Org (KERNAL):

.,EE13 78 SEI
.,EE14 A9 00 LDA #$00
.,EE16 85 A5 STA $A5
.,EE18 20 85 EE JSR $EE85
.,EE1B 20 A9 EE JSR $EEA9
.,EE1E 10 FB BPL $EE1B

PS: AFAIR the source of this "trick" was some issue of "64er"
2018-06-14 21:05
JackAsser

Registered: Jun 2002
Posts: 1458
Quote: @JackAsser: Don't know if its of any value for you but if you use $ee13 you can jump to $ee20 instead and use

LDA #$00
STA $A5
JSR $EE85
JSR $EEA9
BPL *-3
SEI
jsr $ee20

with moving the SEI below the BPL the routine just rips ~30 rasterlines while loading. One might call it "pretty cheap irq loader" :-D

Org (KERNAL):

.,EE13 78 SEI
.,EE14 A9 00 LDA #$00
.,EE16 85 A5 STA $A5
.,EE18 20 85 EE JSR $EE85
.,EE1B 20 A9 EE JSR $EEA9
.,EE1E 10 FB BPL $EE1B

PS: AFAIR the source of this "trick" was some issue of "64er"


Thanks! I’ll keep it simple and just clear the area where the IRQ was needed though. I have a multiplexed sprite overlay which will get distorted even with the trick u mentioned. So let’s forget about IRQ and focus on Kernel memory footprint.
Previous - 1 | 2 | 3 - Next
RefreshSubscribe to this thread:

You need to be logged in to post in the forum.

Search the forum:
Search   for   in  
All times are CET.
Search CSDb
Advanced
Users Online
Matt
hedning/G★P
grasstust/Hoaxers
encore
Unkle K/Reset Magazi..
Brataccas/HF
Shadow/Noice
Harry Potthead
Guests online: 38
Top Demos
1 Uncensored  (9.7)
2 Comaland 100%  (9.7)
3 Edge of Disgrace  (9.7)
4 Coma Light 13  (9.6)
5 The Shores of Reflec..  (9.6)
6 Wonderland XII  (9.6)
7 Lunatico  (9.6)
8 We Come in Peace  (9.6)
9 Incoherent Nightmare  (9.5)
10 Wonderland XIII  (9.5)
Top onefile Demos
1 FMX Music Demo  (9.6)
2 Daah, Those Acid Pil..  (9.6)
3 Arok 20 Invitation  (9.6)
4 Merry Xmas 2017  (9.5)
5 Pandemoniac Part 2 o..  (9.5)
6 Party Horse  (9.4)
7 Dawnfall V1.1  (9.4)
8 In Memoriam BHF  (9.4)
9 Dawnfall  (9.4)
10 Synthesis  (9.4)
Top Groups
1 Oxyron  (9.4)
2 Booze Design  (9.4)
3 Censor Design  (9.4)
4 Finnish Gold  (9.3)
5 Crest  (9.3)
Top Crackers
1 Mr. Z  (9.9)
2 S!R  (9.9)
3 Mr Zero Page  (9.9)
4 Mitch  (9.8)
5 Doc  (9.8)

Home - Disclaimer
Copyright © No Name 2001-2018
Page generated in: 0.066 sec.