| |
Jammer
Registered: Nov 2002
Posts: 1289 |
Event id #3002 : Filterless Single Channel Compo 2020
' -$x0, $x1, $x2, and $x3 are the only waveforms allowed.'
Do these x'es indicate that only these effects can be utilized but I can choose any waveform I want? :) So far it looks like any wavofm with gate and sync only possible - which doesn't make any sense with one voice :D |
|
... 15 posts hidden. Click here to view all posts....
|
| |
ZeHa
Registered: Apr 2009
Posts: 6 |
that's what I planned to do - a "single channel" compo where everything is allowed, but restricted to one channel. the only thing though that should be disallowed would be any form of samples of course. but the question is, where does one draw the line. if someone changes the registers fast enough, it can already be "sample-esque", as compared to someone just doing it once per raster frame. |
| |
Jammer
Registered: Nov 2002
Posts: 1289 |
Quoting F7sus4In my humble opinion, the rules would make more sense if the limitation was one voice, all waveforms and filters. Then you can use all your smart-assery with scarce resources. Right now, it's more like "Take this 5 cent coin and go make us a dinner, but be creative". ;-)
You might be surprised here, actually ;) |
| |
F7sus4
Registered: Apr 2013
Posts: 112 |
@Jammer: Proceed, I'd gladly will. |
| |
CreaMD
Registered: Dec 2001
Posts: 3034 |
Quote: In my humble opinion, the rules would make more sense if the limitation was one voice, all waveforms and filters. Then you can use all your smart-assery with scarce resources. Right now, it's more like "Take this 5 cent coin and go make us a dinner, but be creative". ;-)
Made me smile, thanx ;-) |
| |
Isildur
Registered: Sep 2006
Posts: 274 |
No filters is boring AF ;) |
| |
Mibri
Registered: Feb 2018
Posts: 197 |
Did we get a definitive answer on whether or not hardsync and ring mod effects are allowed, with a silent channel used to set carrier frequencies? |
| |
Jammer
Registered: Nov 2002
Posts: 1289 |
Quoting MibriDid we get a definitive answer on whether or not hardsync and ring mod effects are allowed, with a silent channel used to set carrier frequencies?
Make software ringmod on 1 unlinked channel, ya sissy! :D |
| |
Mibri
Registered: Feb 2018
Posts: 197 |
Quote: Quoting MibriDid we get a definitive answer on whether or not hardsync and ring mod effects are allowed, with a silent channel used to set carrier frequencies?
Make software ringmod on 1 unlinked channel, ya sissy! :D
But daaaaaaad! |
| |
ChristopherJam
Registered: Aug 2004
Posts: 1370 |
No more than 20 writes per register per frame, writes only allowed to registers 0,1,2,3,4,5,6,$0e,$0f,$12 & $18, and the only permitted values for writes to $12 are zero and eight (might need to reset osc3 to get consistent ringmod or sync effects).
Done! |
| |
Eric Dobek
Account closed
Registered: Jun 2020
Posts: 18 |
So, just to clear up some things, the waveforms you can use are $1 through $8. This means triangle, saw, triangle+saw, pulse, pulse+saw, pulse+triangle, pulse+triangle+saw, and noise waveforms are allowed. Since a couple of entries have already used hardsync+ringmod without any linked channels, as long as you can use ringmod+hardsync without using more than one channel, it is allowed. Testbit with hard restart is allowed. Let me know if you have any more concerns. |
| Previous - 1 | 2 | 3 - Next |
