| |
Scarzix
Registered: Aug 2010
Posts: 143 |
Project SIDFX (formerly known as SIDFIXER)
Sorry for spamming you all, but regarding the DUAL SID hardware module SIDFX:
I mailed all PRE-ORDER contacts tuesday and I still miss a reply from 33% of you... please check your spam folder/email if there is any mail from sidfx-preorder@kick-ass.dk (16th december)
Thanks in advance.
There will be a registration site up shortly... so if you didnt pre-order/registrate already, you can also just mail me directly on the sidfx-preorder@kick-ass.dk mail address.
Cheers and merry X-mas to everyone! |
|
... 177 posts hidden. Click here to view all posts....
|
| |
Scarzix
Registered: Aug 2010
Posts: 143 |
I cant test that, as I dont have access to a Reloaded. But it works with any SID model, so if the Reloaded is 100% compatible in hardware, I dont see why it wouldnt work.
I have seen the model with ZIF sockets though and putting a SIDFX on top of that might make it too high to fit beneath the keyboard, but thats a Reloaded decision, not something we can do much about I am afraid.
But I believe the montherboard and the SIDFX is compatible. The SIDFX is designd to be 100% stealth until you access certain bits in a certain order.
Thats why it also works with C128 and SX... they will never know ;-) |
| |
AmiDog
Registered: Mar 2003
Posts: 97 |
I'm a little confused. There seems to be a nice config tool, so are the switches really needed?
I recently got a Reloaded board and went looking for a solderless stereo SID solution for it and found this thread. I have a feeling those clamps wont be able to hold on to the pins of the pin header J13 on the Reloaded. Any chance for a custom version with a suitable connector instead of clamps? |
| |
Thierry
Registered: Oct 2009
Posts: 47 |
Quote: I'm a little confused. There seems to be a nice config tool, so are the switches really needed?
I recently got a Reloaded board and went looking for a solderless stereo SID solution for it and found this thread. I have a feeling those clamps wont be able to hold on to the pins of the pin header J13 on the Reloaded. Any chance for a custom version with a suitable connector instead of clamps?
I was wondering the same thing, if that is compatible with the C64 Reloaded can be offering next week .. |
| |
Grue
Registered: Dec 2001
Posts: 145 |
I find it silly that reloaded didn't have 2 sid sockets and silence mods included on board, instead it boasted about being more compatible which doesn't seem to be the case here.
Use your normal c64 board for sidfx. |
| |
Dano
Registered: Jul 2004
Posts: 226 |
I fear the bigger problem with the reloaded boards is to fit them into a new c64 case as it will rise too high and collide with the keyboard and such. so it will most likely just fit old breadbox cases - if any.
so one will actually need some adapter board to connect between the switchable connector sockets and the sidfx.. |
| |
AmiDog
Registered: Mar 2003
Posts: 97 |
I'm still hoping it will work with the C64 reloaded. Just read this in the comment section for the youtube demonstration video:
Quote:Next and final hardware revision has the coords/cables attached using small "sockets/mounts" like you know them from modern motherboards with LED's and switches. But the point is that you can detach those you don't want to use = less cables in your cabinet.
Should make it fairly easy to connect it to the pin header on the reloaded board instead of using the clamps. If it will fit below the keyboard or not is another question... |
| |
Comos
Registered: May 2004
Posts: 71 |
You need to replace the ZIF SID socket with a low profile one if you want to use it in the Reloaded board.Or you have to do a reposition board in between if you want to keep existing ZIF socket. |
| |
AmiDog
Registered: Mar 2003
Posts: 97 |
I'm going to order a SIDFX anyway, and put it in a different machine if it doesn't fit. I have my reloaded in a C64G case. Don't remember how much space there are between the SID and keyboard though. |
| |
Thierry
Registered: Oct 2009
Posts: 47 |
I'm using an acrylic case, I think I'll have no problems with space, I think i have enough height
 |
| |
ChristopherJam
Registered: Aug 2004
Posts: 1370 |
That c64 is *gorgeous*! |
| Previous - 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | ... | 19 - Next |
