Log inRegister an accountBrowse CSDbHelp & documentationFacts & StatisticsThe forumsAvailable RSS-feeds on CSDbSupport CSDb Commodore 64 Scene Database
You are not logged in 
CSDb User Forums


Forums > CSDb Discussions > Error message: "Found more than one drive on IEC bus" with C128D metal and recent demos
2017-11-08 10:26
Monte Carlos

Registered: Jun 2004
Posts: 258
Error message: "Found more than one drive on IEC bus" with C128D metal and recent demos

Sorry for this lamer question. I use an C128D(metal), currently (although i have used C64 for years until i got room problems with the complete setup).
I have attached a 1541 ultimate and changed the internal 1571 drive to device no 10 by cutting the solder pads. The ultimate has dev no 8. This way i can watch many, mostly old, demos with 1541U. However, the most current demos always complain about more than one drive being enabled. Ok, i thought, plugging off the internal 1571 from the mainbord should fix the problem. I was wrong. The loaders still complain about more than one drive.
Am i wrong with my understanding that plugging off the internal drive also disables the ATN signal?
 
... 34 posts hidden. Click here to view all posts....
 
2017-11-09 11:22
Flavioweb

Registered: Nov 2011
Posts: 357
The drive logic in a 128d is on board, or is "near" the mechanics?
May be that "unplug" the drive mean just unplug the mechanics but logic still active...
No?
2017-11-09 13:17
Krill

Registered: Apr 2002
Posts: 952
The C128D has discrete PCBs for main computer and drive, so the drive part should be completely unpluggable.
The C128DCR has both PCBs merged into one, but what this means for the disconnectibility of the drive portion, i can't say.
2017-11-09 14:22
Krill

Registered: Apr 2002
Posts: 952
Looking at the C128DCR (which is the metal C128D) schematics, it very much seems like there is no way of disconnecting the drive electronics from the serial bus, save cutting their traces.

Uploading a small program to the built-in drive that would disable interrupts and set ATNA according to ATN IN in a loop would probably solve your problem, but alas, i have no time right now to hack it up.
2017-11-09 15:24
Monte Carlos

Registered: Jun 2004
Posts: 258
If its not possible to plug of the drive, there should still be the possibility to cut the ATN line and insert a switch instead? After googling i found an howto on herdware, however there is some pic missing.
http://commodore128.mirkosoft.sk/herdware.html
Somebody knows what they mean with "threethrough-hole solder pads"?
2017-11-09 15:32
Krill

Registered: Apr 2002
Posts: 952
Would you really want to cut traces if there's a viable software solution? Poor C128.
2017-11-09 15:34
Krill

Registered: Apr 2002
Posts: 952
Also, does the little BASIC line above report a drive on #10, as is expected?
2017-11-09 15:43
Monte Carlos

Registered: Jun 2004
Posts: 258
Can't try it at the moment with my two year boy next to me. Will try in the evening.
2017-11-09 20:45
Monte Carlos

Registered: Jun 2004
Posts: 258
Yes, it shows drive on ID 10.I ridiculously just unplugged the mechanics.btw:hw hack would not be the worst solution for me if it permitted a durable, unproblematic operation of 1541u with my 128dcr.
2017-11-09 20:48
Krill

Registered: Apr 2002
Posts: 952
If running a small "shut up everybody who's not #8" program before watching that demo is too much, wellÂ… yeah. :)
2017-11-09 21:11
Monte Carlos

Registered: Jun 2004
Posts: 258
I did already with this

#include <cbm.h>
#include <stdio.h>


char openFile(void){
	char openErr;
	if ( (openErr = cbm_k_open()) ){
		printf("Open failed: Return value = %d\n", openErr);	
	}
	return openErr;
}

void main(void){
	char drivecmd[] = "u0>\x09";
	char openErr;
	
	cbm_k_setlfs (15, 8,15);
	cbm_k_setnam (drivecmd);
	if ( !(openErr = openFile()) ){
		cbm_k_close(15);
		printf("Successfully changed device\n");
		
	}else{
		printf("Could not change device\n");
		cbm_k_close(15);
	
	}
}


and this

OPEN 1,ID,15,"M-W"+CHR$(119)+CHR$(0)+CHR$(2)+CHR$(0)+CHR$(0):CLOSE 1 


My software solution attemps were not of much use up to now.
However, your drive code suggestion is different.
I could place an installation code into the root dir of the 1541U usb stick, so that i could execute it anytime before watching demos.
Didn't know that ATN call and answer chain could be influenced by software.
Previous - 1 | 2 | 3 | 4 | 5 - Next
RefreshSubscribe to this thread:

You need to be logged in to post in the forum.

Search the forum:
Search   for   in  
All times are CET.
Search CSDb
Advanced
Users Online
hostile/HmF
Acidchild/Padua
ZeSmasher/F4CG
St0rmfr0nt/ExCeSs
Dymo/G★P
LKP/CFN-3001
blendo75
Core/(VPN)
Guests online: 35
Top Demos
1 Uncensored  (9.7)
2 Comaland 100%  (9.7)
3 Edge of Disgrace  (9.7)
4 Coma Light 13  (9.6)
5 The Shores of Reflec..  (9.6)
6 Wonderland XII  (9.6)
7 We Come in Peace  (9.6)
8 Lunatico  (9.6)
9 Incoherent Nightmare  (9.5)
10 Wonderland XIII  (9.5)
Top onefile Demos
1 Daah, Those Acid Pil..  (9.6)
2 Arok 20 Invitation  (9.5)
3 FMX Music Demo  (9.5)
4 Pandemoniac Part 2 o..  (9.5)
5 Dawnfall V1.1  (9.5)
6 Treu Love [reu]  (9.5)
7 Merry Xmas 2017  (9.4)
8 In Memoriam BHF  (9.4)
9 Dawnfall  (9.4)
10 Synthesis  (9.4)
Top Groups
1 Oxyron  (9.4)
2 Booze Design  (9.4)
3 Censor Design  (9.4)
4 Finnish Gold  (9.4)
5 Crest  (9.3)
Top Swappers
1 Derbyshire Ram  (10)
2 Splatterhead  (9.8)
3 Zyron  (9.8)
4 Acidchild  (9.8)
5 Walker  (9.7)

Home - Disclaimer
Copyright © No Name 2001-2018
Page generated in: 0.061 sec.