Log inRegister an accountBrowse CSDbHelp & documentationFacts & StatisticsThe forumsAvailable RSS-feeds on CSDbSupport CSDb Commodore 64 Scene Database
 Welcome to our latest new user Båtsman ! (Registered 2018-06-21) You are not logged in 
CSDb User Forums


Forums > CSDb Discussions > Error message: "Found more than one drive on IEC bus" with C128D metal and recent demos
2017-11-08 10:26
Monte Carlos

Registered: Jun 2004
Posts: 258
Error message: "Found more than one drive on IEC bus" with C128D metal and recent demos

Sorry for this lamer question. I use an C128D(metal), currently (although i have used C64 for years until i got room problems with the complete setup).
I have attached a 1541 ultimate and changed the internal 1571 drive to device no 10 by cutting the solder pads. The ultimate has dev no 8. This way i can watch many, mostly old, demos with 1541U. However, the most current demos always complain about more than one drive being enabled. Ok, i thought, plugging off the internal 1571 from the mainbord should fix the problem. I was wrong. The loaders still complain about more than one drive.
Am i wrong with my understanding that plugging off the internal drive also disables the ATN signal?
 
... 34 posts hidden. Click here to view all posts....
 
2017-11-13 15:59
Monte Carlos

Registered: Jun 2004
Posts: 258
Hhhm, i just compiled it with acme (compiled without problems). However, when executed i just get the ready prompt as with run/stop restore. Maybe something went wrong when the src was copied into csdb? Or do i have to specify specific compile options? I disassembled code which showed that branch and jump targets were ok.
2017-11-13 16:05
Krill

Registered: Apr 2002
Posts: 952
It executes a BRK if there's an error, such as device not present. Have you changed "lda #9 ; device number" to #10 for your setup?
2017-11-13 16:37
Monte Carlos

Registered: Jun 2004
Posts: 258
Ahh fuck,sorry!
2017-11-14 13:47
Monte Carlos

Registered: Jun 2004
Posts: 258
So now some good new:

I tested FLT K9 orange with three settings and displayed active drives beforehand. Drive 8 = 1541u, drive 11=1571:

1.) No script ran -> Drive 8 and 11 shown as active.
Demo loader outputs error message that more than one drive is on the bus

2.) Ran script "OPEN 1,11,15,"M-W"+CHR$(119)+CHR$(0)+CHR$(2)+CHR$(0)+CHR$(0):CLOSE 1" to disable drive 11 -> Only drive 8 shown as active. Demo loader does not output error message but instead just hangs up.

3.) Ran Krills script -> Only drive 8 shown as active. Demo loader works perfectly.

I now created a folder 0_scripts in the base dir of the 1571U and put all those successful and unsuccessful code attemps into a d64 in this folder. This way i can quickly disable the internal 1571 before running any demos.
As remarked by Skate, the d64 should be mounted before running any contents. If they are run directly, you will not receive the "ready." prompt after code has been run.
2017-11-14 14:14
Krill

Registered: Apr 2002
Posts: 952
Okay, cool, but do both variants work nicely, with and without "tightloop" enabled? :)
2017-11-14 14:31
Monte Carlos

Registered: Jun 2004
Posts: 258
I did not test this up to now. Currently tightloop = 0.
2017-11-15 12:13
Monte Carlos

Registered: Jun 2004
Posts: 258
Tightloop = 1 also works fine.
2017-11-15 12:24
Krill

Registered: Apr 2002
Posts: 952
Alright, great, thanks! I guess i'll also post this on Codebase64 on a boring Sunday or so, since this is a problem that many people might face.
2017-11-15 15:10
Monte Carlos

Registered: Jun 2004
Posts: 258
In common it would be interesting to silence all but one drive before irq-loading sth and then awake drives again after loading or at the end of the production.
2017-11-15 15:53
tlr

Registered: Sep 2003
Posts: 1167
Nice work here! I second the "awake" bit. Not entierly trivial. Some kind of more advanced port knocking I guess. Maybe it's sufficient with a sequence of well timed ATN toggles?
Previous - 1 | 2 | 3 | 4 | 5 | 6 - Next
RefreshSubscribe to this thread:

You need to be logged in to post in the forum.

Search the forum:
Search   for   in  
All times are CET.
Search CSDb
Advanced
Users Online
Snabel
taper/ΤRIΛD
LDX#40
Color Bar
JackAsser/Booze Design
Mr Ammo/SCS*TRC
Guests online: 27
Top Demos
1 Uncensored  (9.7)
2 Comaland 100%  (9.7)
3 Edge of Disgrace  (9.7)
4 Coma Light 13  (9.6)
5 The Shores of Reflec..  (9.6)
6 Wonderland XII  (9.6)
7 We Come in Peace  (9.6)
8 Lunatico  (9.6)
9 Incoherent Nightmare  (9.5)
10 Wonderland XIII  (9.5)
Top onefile Demos
1 Daah, Those Acid Pil..  (9.6)
2 FMX Music Demo  (9.5)
3 Pandemoniac Part 2 o..  (9.5)
4 Dawnfall V1.1  (9.5)
5 Treu Love [reu]  (9.5)
6 Arok 20 Invitation  (9.5)
7 Merry Xmas 2017  (9.4)
8 In Memoriam BHF  (9.4)
9 Dawnfall  (9.4)
10 Synthesis  (9.4)
Top Groups
1 Oxyron  (9.4)
2 Booze Design  (9.4)
3 Censor Design  (9.4)
4 Finnish Gold  (9.4)
5 Crest  (9.3)
Top Coders
1 Axis  (9.8)
2 Tom-Cat  (9.8)
3 Graham  (9.8)
4 CRT  (9.8)
5 Trap  (9.8)

Home - Disclaimer
Copyright © No Name 2001-2018
Page generated in: 0.069 sec.