| |
SIDWAVE
Account closed
Registered: Apr 2002
Posts: 2238 |
Release id #124394 : 1541 Ultimate Case
Who wants to print one for me, and maybe others ? |
|
| |
chatGPZ
Registered: Dec 2001
Posts: 11154 |
download model data, go to library... print it?
that said, the 3d printed stuff i have seen so far wasnt very durable at all - not well suited for something like a cartridge case, imho. |
| |
DeeKay
Registered: Nov 2002
Posts: 362 |
Gpz: I dunno what you've seen, but the material was probably PLA. PLA is bio-degradable, and hence not very durable. If you print with ABS, it's just normal industrial standard plastic that is used for most other injection molded plastic parts, and if you print it at 100% solid it is *very* durable, believe me! ;-)
Or you've seen laser sintered (cheap!) prototype material, like the case prototype that Weasel had with him on X2012!... That is also not indicative of the final build quality! ;-) |
| |
chatGPZ
Registered: Dec 2001
Posts: 11154 |
Quote:If you print with ABS, it's just normal industrial standard plastic that is used for most other injection molded plastic parts, and if you print it at 100% solid it is *very* durable, believe me! ;-)
that pretty much sums up nicely what i have heard every time before i have seen that junk =) |
| |
DeeKay
Registered: Nov 2002
Posts: 362 |
Ah, mein Lieblings-Widerspruchgnom und Berufs-Schlechtmacher, wie hab ich dich doch vermisst! ;-D |
| |
chatGPZ
Registered: Dec 2001
Posts: 11154 |
zum glück hält der tonertroll ja dagegen, da kann nix schief gehen :) |
| |
Marq
Registered: Sep 2011
Posts: 47 |
With proper fill and wall thickness the case is pretty sturdy, don't worry :) |
| |
DeeKay
Registered: Nov 2002
Posts: 362 |
With how many wall layers did you print it, Marq? And what about the fill-in density? Probably 100%, since there's no notable volumetric parts in it, huh? ;-)
Any specific layer width? I use 0.4mm on my PrintRbot... |
| |
Marq
Registered: Sep 2011
Posts: 47 |
0.6 mm solid wall thickness - affects only the bottom in practice. 40% fill. YMMV. AFAIR the layer height was 0.1 mm, but less precision would do fine. |
| |
DeeKay
Registered: Nov 2002
Posts: 362 |
And how many wall layers is 0.6mm? <:-) |
