| |
Rebok
Registered: Apr 2017
Posts: 10 |
C64 Reloaded MK2 problem
After few attempts with several monitors and VICs, problems with horizontal synchronization of the image displayed by MK2 still occur. Is there any Reloaded MK2 user, who have similar problem? I just want to find out if my model is damaged or is a general defect of these boards.
https://drive.google.com/open?id=14VfDlzQGFIj4kfMJiVOdmh6-y6CUt..
https://drive.google.com/open?id=1Jl_bieEHT2Eq5w--k2DEWX1v5LSCD..
https://drive.google.com/open?id=14l3FytlXy6Rd_F_BvBOUVG-70A_Ze.. |
|
... 10 posts hidden. Click here to view all posts....
|
| |
Rebok
Registered: Apr 2017
Posts: 10 |
Yes... |
| |
V-12
Registered: Nov 2003
Posts: 206 |
What kind of PSU you are using with these boards?
Does the problem occur on MK2 but without Ultimate plugged?
Do you have in your room router or any kind of active LTE modem?
Are you sure that you don't have any issues with electricity in your home?
From what you wrote I think, that there might be an issue with PSU. |
| |
Rebok
Registered: Apr 2017
Posts: 10 |
1. I use PSU from LG and PSU from my ruter Linksys. Without any changes.
2. As I wrote ealier: yes, problem occur without anu hardware.
3. No.
4. Yes, I`m sure.
How do you think what PSU I need? This PSU from icomp looked like the typical model.
P.S. I notified the problem to Jens and wait for the answer. |
| |
V-12
Registered: Nov 2003
Posts: 206 |
The best way it would be to use laboratory power supply to be 100% sure. I don't believe that any of chips may cause these problems. You could also try to get some universal but strong PSU. It is required to have 2A PSU which have less than 100mV ripple on 12V. |
| Previous - 1 | 2 - Next |
