| |
Scarzix
Registered: Aug 2010
Posts: 143 |
Project SIDFX (formerly known as SIDFIXER)
Sorry for spamming you all, but regarding the DUAL SID hardware module SIDFX:
I mailed all PRE-ORDER contacts tuesday and I still miss a reply from 33% of you... please check your spam folder/email if there is any mail from sidfx-preorder@kick-ass.dk (16th december)
Thanks in advance.
There will be a registration site up shortly... so if you didnt pre-order/registrate already, you can also just mail me directly on the sidfx-preorder@kick-ass.dk mail address.
Cheers and merry X-mas to everyone! |
|
... 177 posts hidden. Click here to view all posts....
|
| |
Frantic
Registered: Mar 2003
Posts: 1627 |
Yes, excellent.
...and speaking of that, it would be very nice if the source code for that configuration tool was available, especially since there is no programming reference available for SIDFX (as far as I know?). I would like to implement explicit support for the SIDFX in a music editor that I am currently working on. |
| |
AmiDog
Registered: Mar 2003
Posts: 97 |
Just installed my SIDFX. Other than the first SID I took from a broken C64 being broken, it all went smoothly. Took about 3 hours to mod the case and get everything installed.
I've run the config tool a few times, and once it failed to detect the SID types. It found two SIDs but listed them as unknown. Should I be worried about that? |
| |
Lotus
Registered: Nov 2004
Posts: 7 |
Frantic: Don't worry, the SIDFX API will be made available soon'ish (Scarzix will coordinate that), including example source code for easy implementation. But right now we are focusing our efforts toward improving the general documentation :) |
| |
Lotus
Registered: Nov 2004
Posts: 7 |
AmiDog: SIDs detected as unknown are operated in "safe mode" at 9V (and with 8580 filter caps) so the chips will not be damaged, but they may not operate properly for several reasons. I have only seen this with a handful of bad SID chips (mostly 6581), that were either totally dead or sounded very wrong in a plain C64. Have you tested them prior to using them with SIDFX? |
| |
mhindsbo
Account closed
Registered: Dec 2014
Posts: 50 |
I have the same issue. I have a C64R with SID socket #1 : 6581and SID socket #2 : 8580. Both SID's are tested and working stand alone.
Sometimes the diagnostic tool detect none (unknown), sometimes one and sometimes the other and sometimes both.
When it does detect both then everything works fine and I can play stereo tunes or switch back and forth from one to the other. |
| |
Scarzix
Registered: Aug 2010
Posts: 143 |
okay, first version of the CONFIG tool documentation page is up now. We have added version number and dates to both Manual and Documentation pages now, so you can see if they have changed since last time you looked at them.
http://www.sidfx.dk/config-tool
http://csdb.dk/scener/?id=27019, let's get in touch and see if we can resolve that issue for you. |
| |
AmiDog
Registered: Mar 2003
Posts: 97 |
@Lotus: I've used both SIDs one by one in my Reloaded board, and as far as I can tell, they both sound correctly. One is a 8580 and the other is a 6582. I've only seen them reported as unknown once, and then both were shown as unknown. The other 5-6 times I've used the config tool, they were both identified as 8580. I got a little worried when I got unknown, but after a reset, the config tool reported them as 8580 again. Maybe the 1541U (first version) I'm using does interfere somehow, or maybe it's the Reloaded board. |
| |
AmiDog
Registered: Mar 2003
Posts: 97 |
About testing SID chips. Are there any good tools one can use to determine if a SID chip is working correctly? While it's quite easy to hear if a channel is completely dead, how can one tell if the filters are working correctly for example? |
| |
chatGPZ
Registered: Dec 2001
Posts: 11116 |
the filter (and some other things) cant be tested by a program unfortunately |
| |
Grue
Registered: Dec 2001
Posts: 146 |
It seems that sidfx took easy way out and +5v line is mostly unfiltered resulting c128 bus noise being on humorous level on sidfx audio output.
Any tips for filtering +5v line, in my previous sid noise filtering hacks I used ferrite and capacitor circuit, but should dc/dc be better on this?
// Grue |
| Previous - 1 | ... | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 - Next |
