| |
Shadow
Account closed
Registered: Apr 2002
Posts: 355 |
1541U or Chameleon?
So when I was at LCP2011 I saw that many were running 1541U:s, and even the compo entries were ran from one, so it seems like it's been a established hardware.
So I'm looking into getting one. But then I started reading about the Chameleon, which seems to promise to do almost the same, plus even more.
As the Chameleon is still seems to be in beta stages, I guess it's not easy to get any info on whether it's a better choice or not, but I thought I'd ask anyway.
1541U users though I guess there will be plenty of here, so let me ask you - how's compatibility? Does older trackloading demos run? What about disk-swapping, how many multidisk demos survive the freeze-switch-disk-resume cycle? |
|
... 16 posts hidden. Click here to view all posts....
|
| |
chatGPZ
Registered: Dec 2001
Posts: 11350 |
noone forces you to use the vga output, no. you can always connect a regular monitor =)
however, disabling the c64 "emulation" stuff is not possible, that would make some things impossible (like the turbo mode, or not needing an iec cable). |
| |
SIDWAVE
Account closed
Registered: Apr 2002
Posts: 2238 |
Quote: I have to say that I don't understand how the Chameleon could provide "Stereo SID chip emulation (at 1 Mhz sample rate, very clean sound with no aliasing!)" when being in standalone mode. It says it does on this page:
http://www.syntiac.com/chameleon.html
How the hell do you write to a SID that is not connected to the C64 (other than through the serial cable I suppose)? :)
//FTC
the expansion port is wired to the sid and vic by cbm design, in old days you could get sid expander and other stuff.
thats what jens has exploited.
BOGG had a FM synth card he tried to use, thats when he left C64 to go for midi music. |
| |
MaD ][
Registered: Sep 2004
Posts: 23 |
Quote: STandalone mode? You mean it was possible to have 1541U plugged only by serial cable (working like disc drive emulator?) sounds very cool.
AFAIK 1541U2 has the ability to become standalone by using the optional tape adapter cable.
If you take a closer look at the connector you'll see a jumper named "J8" where you can read the words "Pass Power to Ultimate" (take a look here http://www.1541ultimate.net/content/images/c2n_extender_c64side..).
The Ultimate-II tape adapter consists of 2 plugs (one fits on the bottom of our beloved 1541U-II and the other one plugs into the CASSETTE port of C64); afaik there are 2 different plugs for the 1541U-II the first you can see here were shipped with an additional mini-USB connector in place of the "J9" placeholder you'll see here http://www.1541ultimate.net/content/images/c2n_extender_c64side.. ... the newer plug is simpler than the predecessor and only provides the "J4" connector.
Anyone can confirm that?
BTW: I own the Chameleon and both version of the 1541Ultimate and must say that the latter is is the best 1541 replacement to date, if you have to order one please consider the bundle with the optional tape adapter. On the other hand Chameleon is still in development stage (at least on the firmware side since hardware is considered production and final) and far from being usable as the only solution; Chameleon has it's own advantages over 1541U-II; IMHO I suggest to wait and see how the firmware development evolves.
just my $0.02 |
| |
Hermit
Registered: May 2008
Posts: 208 |
I bought a Turbo Chameleon 64 at the end. I'm quite pleased with it in the first 2 days, amazing work! \o/
The 1541 emulation wasn't as good as I expected (only some demos worked, maybe I didn't adjust some settings properly), but on the other hand the VGA output and some other aspects won the battle. Oh, and it arrived fast after Vesalia received the payment :)
I like the 2 panel file-browser, but I couldn't find 'copy .prg files' function yet what I missed in the MMC64 Replay too. Maybe with some updates this important thing will be put in, or hopefully there are some plugins to handle .prg and for faster d64 read/write operations...
1541U is a really beautiful project, but I didn't have a chance to try how good it is. It must be top quality for what it's capable of, according to what I've read about it.. |
| |
chatGPZ
Registered: Dec 2001
Posts: 11350 |
"but I couldn't find 'copy .prg files' function"
F5 in two panel mode :) |
| |
Hermit
Registered: May 2008
Posts: 208 |
Thx. I found the F5 in the list after upgrading the bios&core from the factory 'beta 7' to 'beta 8c'. (previously its place was empty in the help, only F6 was there.)
Special thanks for making it possible to use Chaco GUI in Linux via WxWidgets.
I'm impressed by the whole TC64 project very much :)
Good to see the fast improvement in the VGA mode (CRT emulation \o/). |
| |
Oswald
Registered: Apr 2002
Posts: 5086 |
"I'm quite pleased with it, amazing work" vs "only some demos worked"
?
IMHO 1541 emulation is more important than CRT emulation. You can still get fine C= monitors, but you cant send over demos like a breeze using SD cards with a real 1541 and a sucky 1541 emu... |
| |
Hermit
Registered: May 2008
Posts: 208 |
As long as I can watch demos with my real 1541 drive the 1541 emulation is not a priority over the place on my desk occupied by the display and having clear picture when I compose... |
| |
Radiant
Registered: Sep 2004
Posts: 639 |
I really like my Chameleon, but the VIC-II emulation has a few bugs (sprite priorities in Natural Wonders 2 f.ex.) and the 1541 emulation chokes on some loaders (notably Booze Design) that the 1541U handles with no problems. I view it more as an interesting toy at the moment, and as a last resort if I can't get the regular video output to work on a particular screen. |
| |
Oswald
Registered: Apr 2002
Posts: 5086 |
Quote: As long as I can watch demos with my real 1541 drive the 1541 emulation is not a priority over the place on my desk occupied by the display and having clear picture when I compose...
thats a valid point with those priorities :) |
| Previous - 1 | 2 | 3 - Next |
