| |
Unicorn
Registered: Dec 2003
Posts: 6 |
Best copy program to tranfer from 1541 to Ultimate II+
I want to copy some disks from a 1541 to a D64 on an Ultimate II+. I tried this some years ago with my SX64 but it seemed the copier used did not handle CRC checks and retries very well. After byte comparing multiple copies of the same disks there were differences and some programs did crash after running them from the Ultimate.
The 1541 in the current setup has a parallel cable installed. But serial transfer will do fine too. It's not about the speed, but having gooed copies is more important here. The disks are standard formatted, no originals with copy protections.
What copy program(s) would you suggest? |
|
... 11 posts hidden. Click here to view all posts....
|
| |
radius75
Registered: Apr 2022
Posts: 2 |
With such old disks, multiple head cleaning is required after each copy attempt. Old disks leave a lot of dirt on the head.
If these are unprotected disks without "illegal" sectors, I recommend mounting .crt ActionReplay
and copying to .d64 via
Whole Disk Copy with "BAM copy - NO" selected.
While copying, observe whether there are any reading errors. |
| |
LordCrass
Registered: Apr 2023
Posts: 8 |
Have you tried a different SD card? |
| Previous - 1 | 2 | 3 - Next |
