| |
ready.
Registered: Feb 2003
Posts: 441 |
SID A/D conversion (POT-X, POT-Y)
Hi everybody,
I'd like to find some information about the proper usage of the analog inputs of the SID. I'm trying to do some audio acquisition for CD, microphone, ect. into the pot-x pot-y inputs of the SID. Do I need any special hardware between the audio source and the SID input (joystick port pin 5 and pin 9)?
thanx,
Ready. |
|
... 10 posts hidden. Click here to view all posts....
|
| |
ready.
Registered: Feb 2003
Posts: 441 |
@Raf: are you sure about reading a nibble? As far as I know using the pot-x / pot-y, the SID converts a 0-5 V signal into 0-255 digital value (8-bit).
Anyhow, my doubt is how did samplers based on the SID A/D converters (joyport inputs) manage to do a decent sampling? From my experiments I get quite crappy results, caused by (I suppose) the slowness of the A/D conversion. |
| |
algorithm
Registered: May 2002
Posts: 705 |
Better to sample on something like a PC, resample, process and then place on the c64. |
| |
chatGPZ
Registered: Dec 2001
Posts: 11360 |
Quote:Anyhow, my doubt is how did samplers based on the SID A/D converters (joyport inputs) manage to do a decent sampling? From my experiments I get quite crappy results, caused by (I suppose) the slowness of the A/D conversion.
there were no samplers that used the sid a/d converters, because like you said, they are too slow. |
| |
Raf
Registered: Nov 2003
Posts: 343 |
Quote: @Raf: are you sure about reading a nibble? As far as I know using the pot-x / pot-y, the SID converts a 0-5 V signal into 0-255 digital value (8-bit).
Anyhow, my doubt is how did samplers based on the SID A/D converters (joyport inputs) manage to do a decent sampling? From my experiments I get quite crappy results, caused by (I suppose) the slowness of the A/D conversion.
I mean there are 5 data lines connected to joyport. there is even something like fake hrdsid driver - PC connected with C64 by LPT to joyport cable.
www.vulture.c64.org |
| Previous - 1 | 2 - Next |
