| |
ELA
Registered: Aug 2008
Posts: 14 |
XE1541 and Windows
I used to transfer between 1541 and PC several years ago but I had pure DOS mode back then and programs like Starcommander.
I downloaded Starcommander today and found that it started in a dos-window making me realize I dont have any DOS mode anymore. There is some winnt/2000/XP support in StarCommander but I could not get it to work in Vista (yes..V....ista, my only PC with a parallel port).
So.. what tool is best for transferring data between XE1541 and Windows V.....vvv....v.ista.
Else I will have to dig out my old Pentium200 I have stored somewhere :)
ELA/Antimon |
|
... 11 posts hidden. Click here to view all posts....
|
| |
ELA
Registered: Aug 2008
Posts: 14 |
Looks like a combo-solution for me: I fetch my dusty p200 so I can transfer some stuff quick AND I will order a XM/XE adaptor ...... AND get the Chameleon64 when it becomes available :-D |
| |
Devia
Registered: Oct 2004
Posts: 401 |
Quoting Jan HarriesXE can be transformed to XM by swapping wire 4+6 or 4+5 in the one end, simply. But you have to solder a bit.. Check the diagrams on SC homepage.
Grrr!! STOP giving incorrect, incomplete and otherwise useless advice... Convert your XE1541 cable to an XM1541 cable simply by swapping pins 5 and 6 in the DIN plug. If the DIN plug can be opened there's even a good chance you can do this without soldering anything by just swapping the pins.
But as ELA already stated.. opening the plug is not an option... so more useless, but this time correct, advice at least :-P
|
| |
Fredrik
Account closed
Registered: Apr 2009
Posts: 204 |
I have the XA-1541 cable, and it works really fine with Starcommander and the 1571 diskdrive.
And i run it in clean ms-dos.
|
| |
ELA
Registered: Aug 2008
Posts: 14 |
Update: I could not get my old PC to work any better with the XE1541 than with my new one with Vista/4core cpu etc. After a lot of testing I have concluded that my XE cable is broken (it is over 10 years old at least) :-(
I am now trying to decide whether to buy a XM-adaptor or go straight for a 1541 Ultimate (since Chameleon64 isn't in sale yet and they have no more MMC64's in stock)... Decisions decisions... |
| |
SIDWAVE
Account closed
Registered: Apr 2002
Posts: 2238 |
www.docshardwarekiste.de
he has tons of cables for sale |
| |
Mace
Registered: May 2002
Posts: 1799 |
ELA, buy or build an XM or XA cable right away, save money for a 1541u and when you have that, sell the cable again ;-)
Or keep both, just in case... |
| |
deizi
Account closed
Registered: May 2003
Posts: 95 |
better yet, get a computer with pure ms-dos. they're almost free ya know. |
| |
Frantic
Registered: Mar 2003
Posts: 1641 |
I am afraid that I cannot see a single good reason to go for the X(A/E/M)-1541 cable solution in these days. What would in fact be one such reason? (I don't think there is any.) |
| |
Fredrik
Account closed
Registered: Apr 2009
Posts: 204 |
Quote:better yet, get a computer with pure ms-dos. they're almost free ya know.
As i said before, pure ms-dos can be reached from any pc, just boot to ms-dos.
The important is the right type of lpt port.
But if you have a large desk, you can ofcourse buy a old pc and have it next to the 64.
|
| |
j0x
Registered: Mar 2004
Posts: 215 |
Quote: I am afraid that I cannot see a single good reason to go for the X(A/E/M)-1541 cable solution in these days. What would in fact be one such reason? (I don't think there is any.)
Using nibtools/mnib and friends to dump and remaster original disks (together with a parallel cable)? |
| Previous - 1 | 2 | 3 - Next |
