| |
Wile Coyote
Account closed
Registered: Mar 2004
Posts: 646 |
1541 - PC
problem:
PC is connected to 1541
1541 stays on (spinning) all the time ?
The PC, 1541, lead, worked fine. Then I re installed Windows XP, and all the usual updates (service pack 2, 3 etc). The PCs working fine, the problem is with PC - 1541
any ideas? :)_ |
|
| |
MacGyver
Account closed
Registered: Dec 2001
Posts: 149 |
You should state how the 1541 is connected to the PC (ie which cable). |
| |
Wile Coyote
Account closed
Registered: Mar 2004
Posts: 646 |
Quote: You should state how the 1541 is connected to the PC (ie which cable).
1541 to (printer) Parallel port
the lead worked fine in the past |
| |
WVL
Registered: Mar 2002
Posts: 896 |
Yes.. but what cable? There's a lot of different kind of cables.
http://sta.c64.org/xcables.html |
| |
Wile Coyote
Account closed
Registered: Mar 2004
Posts: 646 |
Quote: Yes.. but what cable? There's a lot of different kind of cables.
http://sta.c64.org/xcables.html
X1541 cable |
| |
WVL
Registered: Mar 2002
Posts: 896 |
Quote: X1541 cable
quote : The X1541 cable is the original cable. It requires an SPP or PS/2 parallel port and it's compatible with all Commodore machines and drives that have the usual serial bus port. However, it's not compatible with the parallel port integrated onto most Pentium and above motherboards.
Answer : you need a different cable.
|
| |
Stryyker
Registered: Dec 2001
Posts: 468 |
Does the drive work ok when connected to nothing? |
| |
Wile Coyote
Account closed
Registered: Mar 2004
Posts: 646 |
Quote: Does the drive work ok when connected to nothing?
If I pull the lead out of the back of the 1541, the 1541 stops spinning. The 1541 works fine.
@WVL The lead is ok. I know this, as it worked fine on the same set up (before I re installed windows xp).
|
| |
Mace
Registered: May 2002
Posts: 1799 |
If you boot the PC with 1541 on, it starts spinning.
You should only turn on the 1541 when the PC is fully booted.
You said the hardware worked before.
That's not a guarantee it didn't break down later ;-)
Oh, and what WVL said. |
| |
Wile Coyote
Account closed
Registered: Mar 2004
Posts: 646 |
working now :)
Googled:
cbm4win 0.1.0a
gui4cbm4win 0.09
I remember from last time, these 2 (above) work fine
The problem was with:
http://www.trikaliotis.net/opencbm#v0_4_2a
OpenCBM 0.4.2
(for 0.4.0 and later, use the version from http://sourceforge.net/project/showfiles.php?group_id=122047)
|
| |
chatGPZ
Registered: Dec 2001
Posts: 11350 |
did you report the problem to spiro then? "fixing" a problem by using software from stoneage doesnt really seem to be a good solution =P |
... 1 post hidden. Click here to view all posts....
|
| Previous - 1 | 2 - Next |
