[CSDb] - User Forums - Shortest code for stable raster timer setup

You are not logged in - nap

CSDb User Forums

Forums > C64 Coding > Shortest code for stable raster timer setup

2020-01-20 16:20

Krill

Registered: Apr 2002
Posts: 2980

Shortest code for stable raster timer setup

While working on my ICC 2019 4K entry (now postponed to ICC 2020, but i hope it'll be worth the wait), i came up with this (14 bytes):

initstabilise   lda $d012
                ldx #10          ; 2
-               dex              ;   (10 * 5) + 4
                bpl -            ; 54
                nop              ; 2
                eor $d012 - $ff,x; 5 = 63
                bne initstabilise; 7 = 70

                [...]; timer setup

The idea is to loop until the same current raster line is read at the very beginning (first cycle) and at the very end (last cycle) of a raster line, implying 0 cycles jitter.

With 63 cycles per line on PAL, the delay between the reads must be 63 cycles (and not 62), reading $d012 at cycle 0 and cycle 63 of a video frame's last line (311), which is one cycle longer due to the vertical retrace.

The downside is that effectively only one line per video frame is attempted, so the loop may take a few frames to terminate, and the worst case is somewhere just beyond 1 second.

The upside is that it always comes out at the same X raster position AND raster line (0), plus it leaves with accu = 0 and X = $ff, which can be economically re-used for further init code.

Now, is there an even shorter approach, or at least a same-size solution without the possibly-long wait drawback?

... 180 posts hidden. Click here to view all posts....

2021-02-01 10:19

Frantic

Registered: Mar 2003
Posts: 1648

Yes, this thread should have some kind of warning sign attached to it. :)

2021-02-01 15:52

Copyfault

Registered: Dec 2001
Posts: 478

Quoting Devia

What an awful thread.. fell down the rabbit hole, turned utterly insane, lost several days of sleep...

How can it be so awful when it guided you into Wonderland :) ??

Quoting Devia

Quiss' original approach is short and elegant, but opcode rewriting confuses my old brain.
Adding a single byte to it's size, the flexibility can be increased somewhat (from 64 to 112 possible pages) and no opcode rewrites, just operand rewrite.

* = $xy00, where x=$0-$f and y=$0-$6 loop: ldy #$08 ldx #$0a shx loop,y jmp loop $xx0A:
Loop times kept at either 10 or 12 cycles, depending on address choice.

Wow, loop times depending on the adress-highbyte. But yeah, a JMP-instruction is needed to change the basic structure from opcode-change to operand-change... (unless one wants to exit from the loop by jumping back, but let's not go that route)

Quoting Devia

As an added bonus, A is not touched - which may or may not matter in your overall timer setup.

So, it's obvious my priority is not size, but readability - and I find this approach a tad more readable ;-)

Hm, ok, I agree that readability was not the main focus most of the times... but at least some variants that leave A untouched were given already (basically those with a CPX#val).

Still, I think the sniplet presented in post#90 (and all variants thereof) is best regarding trade-off between readability and size. And it imposes almost no restriction on the highbyte that can be used;)

Thanks for your version; it just rang the "things that I wanted to do"-bell for me (writing it all up on codebase, that is;)).

2021-02-01 18:10

Devia

Registered: Oct 2004
Posts: 401

Quoting Copyfault

Still, I think the sniplet presented in post#90 (and all variants thereof) is best regarding trade-off between readability and size. And it imposes almost no restriction on the highbyte that can be used;)

That's what I mean about the insanity..I do remember reading that post and the following ones, but apparently didn't recognize their brilliancy the first time around - that one is a keeper! ;-)

2021-02-01 19:06

Oswald

Registered: Apr 2002
Posts: 5094

is there any requierement for the nr of cycles for the whole loop to make sure it will 'always' land on a different cycle of the shx opcode on the badline's 12th cycle?

2021-02-01 19:44

Rastah Bar
Account closed

Registered: Oct 2012
Posts: 336

Yes, see posts 61 and 72 (and 69 for an explanation):

"In the range 5-20, the lengths that do work are 5, 10, 12, 16, 18 and 19. But note that in particular, length 8 (a.k.a. branching directly to the SHX) does not."

"Indeed, loop length of 17 gets "fixed" by the border. Depending on which cycle you land on initially, loop exit gets delayed by up to three frames, but it'll eventually align.
A similar thing happens with 27, which takes up to four frames to align.
Those seem to be the only "special" (multi-frame) cases below 30."

2021-02-01 20:47

Oswald

Registered: Apr 2002
Posts: 5094

thanks for everyone for the explanations, this shx method is really cool :)

2023-05-11 19:00

Quiss

Registered: Nov 2016
Posts: 43

Sometimes, you want to set up a timer that loops once per frame, not per line, and on a stable cycle.
The shx code snippets posted so far give us a constant x position, but on a random y, so won't work for that.

But you can do:

        ldy #$01
loop:
        ldx #243  (or any other badline)
        cpx $d012
        bne *-3
        shy $ffff, x
        lda $ff, x
        beq loop

This always drops us out on line 243 cycle 62, and takes up to seven frames to do so.

Previous - 1 | ... | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 - Next

Refresh

Subscribe to this thread:

You need to be logged in to post in the forum.

Search the forum:
Search for in
All times are CET.

Search CSDb

Advanced

Users Online

rambo/Therapy/ Resou..
Flashback
katon/Lepsi De
LightSide
Martin Piper
Alakran_64
Matt
Hein
Guests online: 109

Top Demos

1 Next Level  (9.7)
2 13:37  (9.7)
3 Mojo  (9.7)
4 Coma Light 13  (9.6)
5 Edge of Disgrace  (9.6)
6 What Is The Matrix 2  (9.6)
7 The Demo Coder  (9.6)
8 Uncensored  (9.6)
9 Comaland 100%  (9.6)
10 Wonderland XIV  (9.6)

Top onefile Demos

1 Layers  (9.6)
2 No Listen  (9.6)
3 Cubic Dream  (9.6)
4 Party Elk 2  (9.6)
5 Copper Booze  (9.6)
6 Rainbow Connection  (9.5)
7 Dawnfall V1.1  (9.5)
8 Onscreen 5k  (9.5)
9 Morph  (9.5)
10 Libertongo  (9.5)

Top Groups

1 Performers  (9.3)
2 Booze Design  (9.3)
3 Oxyron  (9.3)
4 Triad  (9.3)
5 Censor Design  (9.3)

Top Diskmag Editors

1 Magic  (9.8)
2 hedning  (9.6)
3 Jazzcat  (9.5)
4 Elwix  (9.1)
5 Remix  (9.1)

Page generated in: 0.045 sec.