| |
Repose
Registered: Oct 2010
Posts: 225 |
Digi synth/4 ch SID concept
I was thinking about digis and had an idea. Imagine playing an intro to a tune composed to use 3 channels as normal, but for two of them you swap between channel 3. On each pass, sample osc3/env3 and multiply them (and mix the 2nd pass into the first pass). You have one measure of the tune in 2 channels as samples. You can play them as a sample and then add 1 more channel like magic. The concept can be expanded to add a few more channels.
A few problems; mixing too much lowers the quality, and there could be severe aliasing due to low sample rate, and some restrictions in composition.
The advantages are the initial size is small and no complicated synth routines are needed, and it would seem like magic :) |
|
... 10 posts hidden. Click here to view all posts....
|
| |
Oswald
Registered: Apr 2002
Posts: 5094 |
Sorry CJ that one slipped through my attention |
| |
Repose
Registered: Oct 2010
Posts: 225 |
I'm confused here - I thought the update rate of a typical music routine was once per frame, unless its a "4x" player with more. Also the length of the routine is 250 cycles or so. At 120bpm, a 1/32nd note is 16ms, which is about 1/60th of a second, or one (NTSC) frame. Its effects like a smooth glissando which may require a faster update interval. There's little point in any musical movement being too fast, as its beyond human perception.
Next, sample playback by some methods is limited to 8kHz or 4096 cycles (that's not a coincidence, as its the range of the frequency register). So we have plenty of time to both playback and sample. And if sampling while playing is an issue, you can easily pre-play and buffer some sections, though obviously that would create a delay before starting (and the buffering can be muted as well). Otherwise, you handle that in the composition, and simply not engage any sample playback until a few riffs have been played at least once.
Of course you can create a soft synth and that's a whole other approach, but considering the DSP involved, there's going to be limits in real-time synthesis. Its been done in the 80s with "Musical Applications of Microprocessors" - Hal Chamberlain. He wrote a string synth for the PET, and the demo contains the song "dueling banjos". This could be ported to the c64 easily. But, for a smaller size and for simplicity, I'd like to use the SID itself.
It boggles my mind why anyone would want to write a soft synth when the SID already does all the calculations and you only have to record them :) |
| |
Mixer
Registered: Apr 2008
Posts: 452 |
Just code it. Show everyone that it can be done. |
| |
chatGPZ
Registered: Dec 2001
Posts: 11386 |
Indeed. I recommend reproducing that "echo" stuff first (this is very easy) to get a feeling for how it sounds, and what works and what doesn't. |
| |
Repose
Registered: Oct 2010
Posts: 225 |
Well sure, it would be fun to work on this, but I have no experience using a play routine and I can't write music, so that kinda limits me. |
| |
ChristopherJam
Registered: Aug 2004
Posts: 1409 |
The part of the routine that triggers notes and modulates frequency/pulse width/filters/waveforms only runs once or twice per frame, but as soon as you start playing (or recording) samples, you need a second routine that interrupts once per sample - so every second raster for ~8KHz samples. That one only has 126 cycles to work with, less if you have badlines. |
| Previous - 1 | 2 - Next |
