| |
JackAsser
Registered: Jun 2002
Posts: 2014 |
Eye of the Beholder
Resumed. Easy Flash.
https://youtu.be/dvWrimZUk40 |
|
... 259 posts hidden. Click here to view all posts....
|
| |
chatGPZ
Registered: Dec 2001
Posts: 11360 |
contact jens, i cant tell any of that... all i know is that the emulation is half working =P |
| |
JackAsser
Registered: Jun 2002
Posts: 2014 |
Quote: contact jens, i cant tell any of that... all i know is that the emulation is half working =P
I see! I kept it simple and just replicated Skoe’s logic into the PLD including the delay of 1 dotclk etc. If I find cheap 2 or 4 MB chips I’ll add option for that. Up to 4MB would still remain EF1 compatible (256 banks). |
| |
chatGPZ
Registered: Dec 2001
Posts: 11360 |
WIP specs are here... its a bit "different". probably due to the low cost design jens is aiming for (it uses a SPI flash). |
| |
JackAsser
Registered: Jun 2002
Posts: 2014 |
Quote: WIP specs are here... its a bit "different". probably due to the low cost design jens is aiming for (it uses a SPI flash).
I did a similar experiment using cheapo SPI also but got tired of not being able to bring the chip into qspi which is needed to meet bus requirements. I have a design based around an stm32 arm controller at 80mhz + a qspi chip which in theory just barely will meet timing requirements. Got totally bored of coding it so I designed this new cart instead. |
| |
JackAsser
Registered: Jun 2002
Posts: 2014 |
The adapter board hosta the qspi-flash and then a Nucleo dev board is attached on top, just for quick experimenting using arm-based bus logic.
https://ibb.co/S5dtBVw
https://ibb.co/6Dxjpvd |
| |
WVL
Registered: Mar 2002
Posts: 899 |
Update wanted, I need to play! |
| |
JackAsser
Registered: Jun 2002
Posts: 2014 |
Quote: Update wanted, I need to play!
Hehe.
* Intro done.
* Ending soon done (graphically it's done, I just need to code it).
* Final boss end sequence in the making soon done.
* All features implemented.
* Two beta runs so far and all bugs found fixed.
* No more bugs on the todo but more beta testing is needed.
* Box art in the making.
* Hardware done.
* Hardware manufactorer setup and quotes have been received.
* Box printing manufactorer setup and quotes have been received.
* Need to setup website to take preorders.
Stay tuned! |
| |
chatGPZ
Registered: Dec 2001
Posts: 11360 |
btw, gmod3 is ready (boards ordered, only corona can tell when they are back), emulation in VICE, example code in the repo. |
| |
JackAsser
Registered: Jun 2002
Posts: 2014 |
Quote: btw, gmod3 is ready (boards ordered, only corona can tell when they are back), emulation in VICE, example code in the repo.
Ahh great! Will check. EotB will run on my custom cost reduced Easyflash I carts though. |
| |
WVL
Registered: Mar 2002
Posts: 899 |
Can't wait to see this finished! |
| Previous - 1 | ... | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 21 | 22 | ... | 27 - Next |
