| |
Stirf
Account closed
Registered: May 2002
Posts: 26 |
Pre-configured Relaunch64 available?,anyone?
carnage/ex spiders-crew/ex role/ex uturn, wants to investigate for getting back into c64 code.but only has a pc, so i suggested relaunch64 (which i don't actually know i had only heard of) instead of using assemblers inside emulators.but relauch has to be heavily configured and tools found&attached.the quality of the attached tools isn't really an issue, so isn't there any pre-configured downloadable version, with all the main tools and stuff configured that You can provide?info or rather files, more than welcome! |
|
| |
dalezy
Registered: Apr 2002
Posts: 476 |
the version of relaunch64 that i have came along with anything you need. the only thing you have to do is fiddling along with the config - not much of a hard task for anyone who actually ever had his hands on a computer.
all you have to do is actually do some code in it and press either f5 or f6 to compile using acme and run in vice or any other given pc-based emulator. |
| |
MaD ][
Registered: Sep 2004
Posts: 23 |
Basically all the tools you need to get started are:
- Relauch64 2.0 + v2.1beta (with example sources)
- Acme 0.86 (easy to configure in Relaunch)
- Pucrunch
- Vice 1.16
in addiction you can also check-out:
- CC65 (just Asm x-assembler executable)
- Exomizer 1.1.5
Also you need some sources to take a look at... config isn't really a mess, I did it in less than 30min w/o any cross-assembling skill.
Obviously you also need some docs (AAY64 is quite deeper about anything you may need)easily.
Code snipplets could be the really long time consuming config part... I think no coder will spread those code snipplets as they are something like a swiss-army-knife, w/o any comment and "sometimes" really BAD-Coded! ;-)
Remember: RTFM... maybe it will reveal the way to start!
PS: Is there anyone who could share it's code snipplets covering Demo-Effects? |
| |
JackAsser
Registered: Jun 2002
Posts: 2014 |
Most basic VIC-tricks are covered in the C=-hacking magazines and in the VIC-article. However I plan to release my stuff as open source some day. |
| |
WVL
Registered: Mar 2002
Posts: 902 |
Quote: Most basic VIC-tricks are covered in the C=-hacking magazines and in the VIC-article. However I plan to release my stuff as open source some day.
same here :-) |
| |
Oswald
Registered: Apr 2002
Posts: 5094 |
imho c64 is too limited for generalized demo effect code sniplets. |
| |
Tch
Account closed
Registered: Sep 2004
Posts: 512 |
I agree.
Eventhough I kept some small routines on my discs,the really funky stuff would probably be useless for others.
I guess there is not much to add in good routines.
Besides,I don´t think it is possible to copy/paste a good vector routine on top of a plasma. ;)
But I am only a simple coder,just found out that ´8F 18 D0´ actually means something. :P |
| |
Carnage
Account closed
Registered: Jul 2005
Posts: 3 |
tnx for the reactions guys, i didn't know stirf posted this question till after i done some testing with relaunch64. I did manage to compile a sample to .prg, but io had to alter some stuff to get it and put in some parameters for ACME. but what the hack it worked. now i am still trying to get a file crunched and then i am ready, problem is that i have been out for so long that i forgot most of the c64 monitor commands :S i figure that the cruncher had to know what start address the .prg is started on, could be $0801 to $0810 or something. does anyone have a list with all commands for me??
tnx in advance
cng |
| |
Scout
Registered: Dec 2002
Posts: 1570 |
Quote: tnx for the reactions guys, i didn't know stirf posted this question till after i done some testing with relaunch64. I did manage to compile a sample to .prg, but io had to alter some stuff to get it and put in some parameters for ACME. but what the hack it worked. now i am still trying to get a file crunched and then i am ready, problem is that i have been out for so long that i forgot most of the c64 monitor commands :S i figure that the cruncher had to know what start address the .prg is started on, could be $0801 to $0810 or something. does anyone have a list with all commands for me??
tnx in advance
cng
http://www.the-dreams.de/aay.html
Happy coding ;)
---
-= Silicon Ltd. =-
http://www.deco-design.com/scl |
| |
Tch
Account closed
Registered: Sep 2004
Posts: 512 |
Cool to see you want to get back into the C64!
Most commands I use in Monitor are:
D 0800 checking the code
M 0800 Viewing chars.
T 0800 2000 4000 (copy to 4000)
A 0800 Code your own shit.
More is possible,i think,but I use a crt-image of my old cartridge,so I don´t know if they correlate. |
| |
Monte Carlos
Registered: Jun 2004
Posts: 359 |
Use any crossassembler and any make and any texteditor and VICE.
|
... 7 posts hidden. Click here to view all posts....
|
| Previous - 1 | 2 - Next |
