| |
jailbird
Registered: Dec 2001
Posts: 1578 |
Dear CSDb, please help us solve an argument
So, we're having this heated discussion with my gf about the electric stove. She says that if I place a pot on the side of it, the water will boil faster, rather than if it's placed on the center of it. I think it doesn't really matter, the water will boil by the same time on both places.
What do you think, which one is a faster way to boil water?
So, same size of pot, same amount of water, but different locations on the stove.
Oh and sorry for the topic but this makes us nuts, and we'd really need 3d party opinions, you're our only hope :)
|
|
... 17 posts hidden. Click here to view all posts....
|
| |
jailbird
Registered: Dec 2001
Posts: 1578 |
We're on it! Will be back with results! |
| |
Kristian
Registered: Apr 2002
Posts: 126 |
You need to open up the plate and see how the threads are laid out :)
Anyway, when your testing is done and you see that both ways of doing it is dead slow, then go buy an induction cooker. |
| |
Dane
Account closed
Registered: May 2002
Posts: 421 |
Press the pot against the plate for extra boiling speed. This will allow for some cheating during your stove-test. |
| |
enthusi
Registered: May 2004
Posts: 677 |
I see no reason (except for her being a woman) why the water should boild earlier when its not fully on the plate.
None whatsoever.
|
| |
Stainless Steel
Registered: Mar 2003
Posts: 966 |
Quoting DanePress the pot against the plate Please, dont waste the good pot like that, smoke it instead! |
| |
jailbird
Registered: Dec 2001
Posts: 1578 |
Enthusi: no, the pot is fully on the plate, only not on the center, yet on the side of it.
That means she moves the pot as far as she can whilst not exceeding the surface of the stove (yellow circle-thing on the picture).
According to her, due to the slight hole in the middle of the stove (note the picture), the pot's bottom won't be covered 100%. In opposite as if it would be on a totally smooth surface (the side of it). I see the logic, but I don't think that it could matter too much, since the stove heats up fast and really well on the whole surface. But we'll see :)
On the other hand, I don't understand why is there a hole in the middle of old-school electric stoves, in the first place? A friend of mine told me it's probably there for releasing pressure on the metal from the heat, but, that was a guess. Any ideas? |
| |
enthusi
Registered: May 2004
Posts: 677 |
First:
your stove is way too big then and you waste all the precious energy if the pot fits on there in numerous geometrically different positions :)
Another test:
spoil water on the plate, covering it all and see how it behaves :)
Because THEN she might be right - depending on the construction of the coils.
See here:
http://www.istockphoto.com/file_thumbview_approve/4685066/2/ist.. |
| |
Skate
Registered: Jul 2003
Posts: 494 |
put a few heat sensors on the stove which are connected to your c64 by user port. prepare a special cup/glass whatever which can move on the stove by a smartly designed mechanism (invent the wheel if necessery). it should also be able to controlled by c64 (via free user port pins, cartridge port, IEC etc.). then code a simple program which detects hottest place on the stove and makes the cup move to this direction.
don't argue anymore. if you need more details, I can help you. |
| |
jailbird
Registered: Dec 2001
Posts: 1578 |
OK, the first results just came in. Apparently, I was right.
Still have to test it two more times (yes, gf insists it), but I don't think there will be too significant variance anyway.
Thanks guys! :)
|
| |
WVL
Registered: Mar 2002
Posts: 899 |
And the conclusion : bitches are dumb..
who could've thought! :D |
| Previous - 1 | 2 | 3 - Next |
