| |
Intensity
Account closed
Registered: May 2002
Posts: 337 |
Pulse in DMC 5
I have some problems to do a pulse in DMC 5.
How to create a proper pulse?
Let's take for example:
Pulse Editor:
01: 08 33
02: 00 33
03: 00 33
04: 00 33
05: 90 04
After one second there is a click in the sound. How to avoid the clicks?
|
|
... 8 posts hidden. Click here to view all posts....
|
| |
Stryyker
Registered: Dec 2001
Posts: 469 |
Give up DMC5 and use SYNC. MAny things are similar, the pulse, wave tables are basically created the same but has much more power. |
| |
CreaMD
Registered: Dec 2001
Posts: 3075 |
I agree with Stryyker. It's more powerful, comes with good documentation. ;-). Interfece is as spartan as DMC5.0, but it has more creative posibilities with sounds. We did a coop tune with Agemixer which won #2 place at X-2001 ... ;-)
National Park Grave Danger
|
| |
Intensity
Account closed
Registered: May 2002
Posts: 337 |
How to set the Hi-Freq Mode in the Sound Editor of DMC 5? In the docs I have read something about the Bit 3. But I haven't got it what the author meant.
|
| |
Intensity
Account closed
Registered: May 2002
Posts: 337 |
Ok, already found out how to set hi-freq mode...
But What about ADSR? Let's say I have a sound with the ADSR like this :
A D S R
0 0 F 5
Then the note doesn't stop playing, even if I have set a release at 5 ! I mean I can cut the note via the GATE function, but I if I want to create very short sounds it isn't advantageous!
|
| |
CreaMD
Registered: Dec 2001
Posts: 3075 |
Quote: Ok, already found out how to set hi-freq mode...
But What about ADSR? Let's say I have a sound with the ADSR like this :
A D S R
0 0 F 5
Then the note doesn't stop playing, even if I have set a release at 5 ! I mean I can cut the note via the GATE function, but I if I want to create very short sounds it isn't advantageous!
ok let's suppose that: AD SR = 00 F5
to avoid using GATE command in sector... do it like this in waveform editor.. (WV)
01: 41 00 (pulse wave with gate on)
02: 40 09 (pulse wave with gate off)
03: 90 02
of course you will need to have pulse table edited too.. (to hear 41 waves..)
|
| |
Intensity
Account closed
Registered: May 2002
Posts: 337 |
Yet another question.
Is it possible to switch off filter resonance in another channel like voice 3 like in DMC 4 (No Filter Res)?
For Example: I have a Filter in Voice 3 which goes up and down. And I want to have another Filter in Voice 2 which should have exactly the same filter like in Voice 3 (goes up and down too).
This was a cool effect in DMC 4. |
| |
Intensity
Account closed
Registered: May 2002
Posts: 337 |
And another one. That thing with the ADSR we mentioned, does it work also with Arpeggios in any way?
When I have for example:
01 41 04
02 41 09
03 41 0c
04 90 01
How do get a proper short release with it, if ADSR is f.e. 00F4 ? Or isn't that possible? I think then I have to use the GATE command as I couldn't work it out in any other way.
|
| |
CreaMD
Registered: Dec 2001
Posts: 3075 |
Quote: Yet another question.
Is it possible to switch off filter resonance in another channel like voice 3 like in DMC 4 (No Filter Res)?
For Example: I have a Filter in Voice 3 which goes up and down. And I want to have another Filter in Voice 2 which should have exactly the same filter like in Voice 3 (goes up and down too).
This was a cool effect in DMC 4.
the filter is fixed to channel 3 only.
roman |
| |
CreaMD
Registered: Dec 2001
Posts: 3075 |
Quote: And another one. That thing with the ADSR we mentioned, does it work also with Arpeggios in any way?
When I have for example:
01 41 04
02 41 09
03 41 0c
04 90 01
How do get a proper short release with it, if ADSR is f.e. 00F4 ? Or isn't that possible? I think then I have to use the GATE command as I couldn't work it out in any other way.
yes you will have to use gate...
or...
do it like this:
01 41 0c
02 40 04
03 40 09
04 40 0c
05 90 02
or for short noisy start of the sound you can also use ;-)
01 89 60 (noise wave, played in fixed freq)
02 40 04
03 40 09
04 40 0c
05 90 02
roman
|
| |
Intensity
Account closed
Registered: May 2002
Posts: 337 |
Thx for all your help Roman...
About SYNC: What is the latest version of it and where to get it? I only found version 1.0 on CSDB.
Where to get those good documentations?
Arman |
| Previous - 1 | 2 - Next |
