== Building and installing VICE SVN on a fresh Linux Mint 18.2 install ==

This will install a Gtk2 build of VICE on Linux Mint 18.2 from the latest
sources.

Lines starting with '$' are meant to be entered into a terminal session.


Install required packages:

(some of these may already be installed)

$ sudo apt-get install build-essential
$ sudo apt-get install subversion
$ sudo apt-get install autoconf
$ sudo apt-get install automake
$ sudo apt-get install byacc
$ sudo apt-get install flex
$ sudo apt-get install libreadline-dev
$ sudo apt-get install texinfo

( these packages are required for the Gtk2 UI)

$ sudo apt-get install libgtk2.0-cil-dev
$ sudo apt-get install libgtkglext1-dev     # HW scaling
$ sudo apt-get install libvte-dev           # virtual terminal emulation
$ sudo apt-get install libpulse-dev         # pulse audio support
$ sudo apt-get install libpcap-dev          # for ethernet support

( these packages allow one to use media recording)

$ sudo apt-get install libavcodec-dev       # for video capturing support
$ sudo apt-get install libavformat-dev
$ sudo apt-get install libswscale-dev

$ sudo apt-get install libmp3lame-dev       # required for MP3 encoding
$ sudo apt-get install libmpg123-dev        # required for MP3 decoding (and for
                                              mp3@64 cartridge support)

$ sudo apt-get install yasm                 # required for --enable-static-ffmpeg
                                            # and --enable-shared-ffmpeg, yasm
                                            # needs to be >=1.2.0


Make a directory to pull the VICE tree into:
$ mkdir ~/src && cd ~/src


Get the VICE source tree from SVN:
$ svn checkout svn://svn.code.sf.net/p/vice-emu/code/trunk vice-emu-code


Run ./autogen.sh to generate the build system files:
$ cd vice-emu-code/vice
$ ./autogen.sh



Once that worked, it's time to configure VICE:

(Not all of these configure switches are required, but for a Gtk build, at least
 `--enable-gnomeui` is required. By default VICE will install into /usr/local,
 if you want to change that, use the `--prefix=/some/directory` switch.)

$ ./configure --enable-gnomeui --with-resid --enable-fullscreen \
        --enable-ethernet --with-pulse


If that succeeds with configure outputting a large listing of enable/disabled
features, you can build VICE:

$ make


And if that succeeds, you can install VICE:

$ sudo make install