| |
TWW
Registered: Jul 2009
Posts: 545 |
NMI Grounding vs. IRQ Raster interrupts
Ello'
Right!
So If You ground an NMI (trigger it and don't acknowledge it) how come IRQ's are allowed?
Simple, You do the RTI which ends the NMI code but don't ack. the NMI 8-D
Can't for the life of me understand why people don't get that ;-)
cheers! |
|
... 10 posts hidden. Click here to view all posts....
|
| |
Ventura
Account closed
Registered: Jan 2006
Posts: 67 |
Quote:allowing irqs in the nmi code is a risky thing and unless you can perfectly predict the outcome it should be avoided.
Well, it isn't *that* hard to do, here's some proof:
;PAL only - needs sync. too btw
const_timer_speed1 = $4cc6
const_timer_speed2 = $4cc8
start
sei
lda #$35
sta $01
ldx #<irq
ldy #>irq
stx $fffe
sty $ffff
ldx #$00
stx $dc0e
stx $dd0d
stx $dd0e
inx
stx $d019
stx $d01a
lda #$1b
sta $d011
lda $d011
bpl *-3
lda $d011
bmi *-3
lda $d011
bpl *-3
ldx #<nmi
ldy #>nmi
stx $fffa
sty $fffb
ldx #<const_timer_speed1
ldy #>const_timer_speed1
stx $dd04
sty $dd05
ldx #$81
ldy #$01
stx $dd0d
sty $dd0e
end jmp end
timer_low
.byte <const_timer_speed1, <const_timer_speed2
timer_high
.byte >const_timer_speed1, >const_timer_speed2
raster_bah
.byte $00,$09,$02,$08,$0a,$0c,$0f,$07
.byte $01,$07,$0f,$0c,$0a,$08,$02,$09
irq
ldx #$0f
irq_
ldy raster_bah,x
lda $d012
cmp $d012
beq *-3
sty $d020
sty $d021
dex
bpl irq_
inc $d019
bit $dc0e
rti
nmi
.byte $a9 ; LDA #$..
nmi_
.byte 1
eor #1
sta nmi_
tax
lda timer_low,x
sta $dd04
lda timer_high,x
sta $dd05
cli
bit $dd0d
rti |
| |
TWW
Registered: Jul 2009
Posts: 545 |
Ok. I tried it, I thought about it and I even think I understand it...
Now for the real question: When will this approach be beneficial compared to a regular raster compare and some tight timing (stabbing if neccessary)?
No I'm not asking coz I'm a snotnose I'm asking coz I am curious^^ |
| |
Ventura
Account closed
Registered: Jan 2006
Posts: 67 |
A regular raster compare/irq will only get you near a scanline, which can be convieniant for setting registers,
but not for rasterstuff which has to be exact, in most cases this will cost you cycles, but less than using this approach.
Benefits:
1. You can start it anywhere on the screen.
2. You don't need to set $d012
3. No more ugly padding to get the first scanline right.
This is just a quick written routine, experiment with it, add more functionality and find out for yourself.
Edit: And thank assiduous for explaining it, something I won't do, I'm kinda old when it comes to 64 :'( |
| |
Powerslave
Registered: Dec 2006
Posts: 24 |
Can someone post example of demos using NMI interupts so that we understand the potential of this type of interupt?
I've found an old demo from 1990 (unreleased) in my diskbox were I used NMI to remove the sideborder for a fullscreen DYSP. But still I'm not sure what the benefit is compared with IRQ raster interupts. |
| |
Martin Piper
Registered: Nov 2007
Posts: 722 |
Quoting Ventura1. You can start it anywhere on the screen.
Not quite anywhere, there is still the opcode wobble to stabilise. |
| |
Ventura
Account closed
Registered: Jan 2006
Posts: 67 |
Yes you can, even with that "wobble", which can be circumvented by triggering the NMI more than once a frame.
PAL: 63x312 = $4cc8 |
| |
Ninja
Registered: Jan 2002
Posts: 411 |
I usually use IRQ for VIC-based interrupts and NMI for CIA-based interrupts (e.g. double timer stable raster). That separation is convenient and nothing uncommon these days I'd say. There should be plenty of demos to examine. |
| |
Martin Piper
Registered: Nov 2007
Posts: 722 |
Quoting VenturaYes you can, even with that "wobble", which can be circumvented by triggering the NMI more than once a frame.
PAL: 63x312 = $4cc8
You are wrong because the opcode wobble stops you targeting any cycle you like. An NMI is not magically stable just because you set the same timer value at the same source cycle. It wobbles depending on the length of the opcode that was executing when it was triggered.
The double NMI/IRQ method is used because the first triggered opcode does wobble and it needs known code to be executing to get stable for the second trigger. |
| |
Ventura
Account closed
Registered: Jan 2006
Posts: 67 |
Thanks for the info: I'll be more specific next time, I was referring to scanlines.
Retrigging the NMI is far, far from a last minute insight, happy now?. |
| Previous - 1 | 2 - Next |
